SENECA電力監控加工模塊Z-SG,詳細產品資料點擊：SENECA電力監控加工模塊Z-SG
中國服務熱線0755-26738591
Z-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol or the analog output. Sensitivity from 1 to 64mV/V, settable by DIP-switch for integer values, via software for real/integer values. Stable weight indication via Modbus register/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/Modbus register/Modbus commands.
|
Order code : |
|
Z-SG |
|
Description: |
|
Strain gauge input module |
|
Power supply: |
|
10..40 Vdc; 19..28 Vac |
|
Analog input: |
|
1-CH for acquisition (and supply) of strain gauge load cells (isolated 6 wire measure) |
|
Analog output: |
|
1-CH current (0..20, 4..20 mA) or voltage (0..5, 0..10 V) for net weitght re-transmission |
|
Digital channel: |
|
Input / Output for operating settings |
|
Accuracy: |
|
0,01% |
|
Tare reset: |
|
From digital input (side button) |
|
Programmable functions: |
|
Via DIP switch or software |
|
Accessories: |
|
SG-EQ4 (4 load cells junction box) |
|
|
|
1 CH strain gauge CANopen module |
|
| Z-SG系列是一個應變儀的信號轉換器。使用6線或4線技術，都可以通過Modbus-RTU的串行協議或模擬輸出。靈敏度，從1mV/ V到64mV/ V，可通過DIP開關整數值設置，通過軟件的實時/整數的值。
|
中文版
English
Русский язык
電 話： 0755-26998441 
傳 真: 0755-26738841 
手機：13246682860 
公司名稱：
